KLL-SLP-TS03A Pottery Wheel
Product model: KLL-SLP-TS03A
Dimensions: L680 * W640 * H505mm (including basin height)
Working voltage: AC220V
Power: 300W
Speed range: 0-300r/min
Rotary disc diameter: 315mm
Whole machine noise: ≤ 55dB
Weight: ≈ 28KG
Motor: Carbon brush motor
Frame material: Q235-A
Surface treatment: white tabletop+electrostatic spraying
Usage: Production of regular ceramic works by drawing blanks
Parameter introduction
Product model: KLL-SLP-TS03A
Dimensions: L680 * W640 * H505mm (including basin height)
Working voltage: AC220V
Power: 300W
Speed range: 0-300r/min
Rotary disc diameter: 315mm
Whole machine noise: ≤ 55dB
Weight: ≈ 28KG
Motor: Carbon brush motor
Frame material: Q235-A
Surface treatment: white tabletop+electrostatic spraying
Usage: Production of regular ceramic works by drawing blanks
Product description
Product Description:
1. Motor: Driven by a carbon brush motor, the motor noise is detected by a professional and authoritative acoustic testing analyzer NI PXI-103, with a minimum noise value of ≤ 55dB (soft whispers). At the same time, the motor control panel is a touch screen visual operation interface, integrated control, real-time display of motor speed data, to meet the needs of billet creation under various working conditions.
2. Craftsmanship: Adopting a unique full curved surface structure, the curvature of the front sitting position is calculated according to ergonomic equations, which allows the legs to better contact the force points of the panel during casting, making it more effortless. The soft curves give a smooth visual experience. The unique triangular balance support principle, combined with the use of national standard Q235 steel welding and integrated forming technology, makes the whole machine more stable, firm and durable; The panel is made of ABS material and undergoes integrated injection molding process using a 350T injection molding machine. The surface pattern is fine, matte and non reflective, and easy to waterproof and clean; The factory default height is 505mm.
3. Water basin: Designed with a non card position magnetic suction structure and made of PP material, neodymium iron boron magnets are pre embedded through the water basin embedding holes. Through high-pressure injection molding, the water basin can be easily sucked in without any angle, and can rotate 360 degrees at any angle after suction. The non card position magnetic suction structure avoids the problem of mud and water on the body caused by excessive force during the disassembly and assembly process of the mud blocking water basin used in traditional drawing machines, while meeting the requirements of easy suction and easy cleaning.
4. Pedal: Using the Hall effect principle, the specific angle of the Hall element and the permanent magnet element is precisely matched to accurately control the potential difference. During acceleration and deceleration, the motor rotation speed and smoothness can be accurately controlled, effectively avoiding control failure caused by signal attenuation in traditional potentiometers; The outer cover is made of aluminum alloy material with a national standard content of 95%, which is die cast and has the characteristics of corrosion resistance, oxidation resistance, and firmness. The surface sandblasting treatment process of the aluminum alloy is conducive to the adhesion of the surface protective coating. The anti-oxidation electrostatic spray coating makes the surface texture of the product comfortable, durable, and non fading. After professional testing, the continuous service life exceeds 300000 times, and the waterproof level is IPX8, fully improving the service life and safety of the foot pedal.
5. Aluminum disc: Made of hard aluminum alloy material with a national standard content of 95%, it is die cast and formed. The surface is scratch resistant and does not change color. The unique plug-in horizontal lock device is easy to install and more secure, with a surface runout value of less than or equal to 0.1mm, making the creation of various works smoother.
6. Safety: The electronic control part adopts a national standard anti leakage plug (plug insulation resistance level three socket body (shell) ≥ 7.1 * 105M Ω, ground-L ≥ 1.07 * 104M Ω, ground-N ≥ 1.05 * 104M Ω), and the whole machine adopts a flowing arc-shaped structure design, fully improving the anti-collision safety factor and ensuring the stability and safety of the bottom of the billet drawing machine.
( WeChat)