3+ Jingdezhen Baitaohui Ceramic Equipment Co., Ltd BTH Xiaobai Pottery Wheel-Jingdezhen Baitaohui Ceramic Equipment Co., Ltd
| Welcome to visit BaiTaoHui!
BTH Xiaobai Pottery Wheel
  • BTH Xiaobai Pottery Wheel

BTH Xiaobai Pottery Wheel

Product model: BTH-ELP-BP01A

External dimensions: L660 * W480 * H500mm (including water basin height)

Working voltage: AC 220V

Power: 500W

Speed range: 0-250 (r/min)

Rotary table diameter: 315mm

Noise: ≤ 48dB

Weight: ≈ 30kg

Motor: BLDC motor

Frame material: Q235-A

Surface treatment: white+electrostatic spraying

Usage: Conventional ceramic art production by drawing blanks


Parameter introduction

Product model: BTH-ELP-BP01A

External dimensions: L660 * W480 * H500mm (including water basin height)

Working voltage: AC 220V

Power: 500W

Speed range: 0-250 (r/min)

Rotary table diameter: 315mm

Noise: ≤ 48dB

Weight: ≈ 30kg

Motor: BLDC motor

Frame material: Q235-A

Surface treatment: white+electrostatic spraying

Usage: Conventional ceramic art production by drawing blanks


Product description

Product Description:

1. Motor: Using BLDC variable frequency motor drive method, the motor noise is detected by the professional authoritative acoustic testing analyzer NI PXI-103, with a minimum noise value of ≤ 48dB. Starting at 5 revolutions, the acceleration response time of the whole machine is less than 1.5S, the deceleration response time is less than 2S, the speed error is less than ± 3%, the upper horizontal runout is less than 0.1mm, and the lateral horizontal runout is less than 0.05mm, meeting the requirements for blank drawing creation under various working conditions.



2. Craftsmanship: Collaborating with well-known brand design company - Rococo Company, adopting a circular design with a smooth and anti-collision appearance; By combining wood grain texture with Q235 steel, the product returns to the beauty of nature, and the four corner support makes the whole machine more stable, firm, and durable; There is an independent space on the side of the body for storage (storing daily small ceramic tools), and the panel is made of ABS material. It is integrated with a 350T injection molding machine and is easy to waterproof and clean.



3. Water basin: Adopting a non card magnetic suction structure design, made of PP material, neodymium iron boron magnets are pre embedded through the embedded holes of the water basin. Through high-pressure injection molding, the water basin is easily sucked in without any angle, and after being sucked in, it can rotate 360 degrees at any angle. The non card magnetic suction structure avoids the mud blocking water basin used in traditional drawing machines while meeting the requirements of easy suction and easy cleaning, The problem of using excessive force during disassembly and assembly to lower mud and water onto the body.



4. Foot pedal: Using the Hall effect principle, the Hall element and permanent magnet element are precisely matched at a specific angle to accurately control the potential difference. During acceleration and deceleration, the motor rotation speed and smoothness can be precisely controlled, effectively avoiding control failure caused by signal attenuation in traditional potentiometers; The outer cover is made of aluminum alloy material with a national standard content of 95%, which is die cast and formed. It has the characteristics of corrosion resistance, oxidation resistance, and firmness. The surface sandblasting treatment process of the aluminum alloy is conducive to the adhesion of the surface protective coating. The anti oxidation electrostatic spray coating makes the surface texture of the product comfortable, durable, and non fading. After professional testing, the continuous service life exceeds 300000 times, and the waterproof grade is IPX8, fully improving the service life and safety of the foot pedal.

5. Aluminum plate: Made of hard aluminum alloy material with a national standard content of 95%, it is die cast and formed. The surface is scratch resistant and does not change color. The unique insertion type horizontal lock device is easy to install and more secure, with a surface runout value less than or equal to 0.1mm, making it smoother to create various works



6. Safety: The electrical control part adopts national standard anti leakage plugs (plug insulation resistance three-level plug - body (shell) ≥ 7.1 * 105M Ω, grounded - L ≥ 1.07 * 104M Ω, grounded - N ≥ 1.05 * 104M Ω), and the whole machine adopts a circular R-angle structure design, fully improving the anti-collision safety factor and ensuring the stability and safety of the bottom of the billet drawing machine without swinging.
Back to top

Contact information

Jingdezhen Baitaohui Ceramic Equipment Co., Ltd

Business Consulting: +86 15779816565  13907982575

After sales consultation: +86 19179830909 18607983455

E-mailxieweifeng@jdzbth.com

Address: Building B9, Accelerated Base, Changnan New Area, Jingdezhen City, Jiangxi Province

WeChat scan( WeChat)

Copyright © Jingdezhen Baitaohui Ceramic Equipment Co., Ltd ICP:赣ICP备2022010548号 

Technical Support: jaingxihuabang