| Welcome to visit BaiTaoHui!
BTH DD03 Pottery Wheel
  • BTH DD03 Pottery Wheel

BTH DD03 Pottery Wheel

Product Name: BTH-PLP-DD03

External dimensions: L725 * W640 * H420-H520 mm (including basin height)

Working voltage: AC 220V

Power: 400W

Speed range: 0-300 r/min

Rotary table diameter: 352mm

Motor noise: ≤ 39.19dB

Weight: ≈ 36kg

Load: 120kg

Motor: DD motor

Frame material: Q235-A

Surface treatment: white+electrostatic spraying, black

Usage: Conventional ceramic art production by drawing blanks


Parameter introduction

Product Name: BTH-PLP-DD03

External dimensions: L725 * W640 * H420-H520 mm (including basin height)

Working voltage: AC 220V

Power: 400W

Speed range: 0-300 r/min

Rotary table diameter: 352mm

Motor noise: ≤ 39.19dB

Weight: ≈ 36kg

Load: 120kg

Motor: DD motor

Frame material: Q235-A

Surface treatment: white+electrostatic spraying, black

Usage: Conventional ceramic art production by drawing blanks


Product description

Product Description:

1. Motor: Using DD direct drive motor driving method, the motor noise is detected by the professional authoritative acoustic testing analyzer NI PXI-103, with a minimum noise value of 39.19dB. The motor load has automatic torque compensation function, and the maximum output power of torque compensation is 773.4W, meeting the needs of various working conditions for blank drawing creation. The minimum speed can reach ≤ 3 revolutions per minute, and even at the minimum speed, one hand cannot stop the motor. Bidirectional adjustment through the controller and main control panel.

2. Performance: The product has been strictly audited for many times, electromagnetic compatibility, low voltage instruction assessment. Electromagnetic compatibility has passed the grade test, and the product can be more widely used in various civil places. The product can realize emergency start and stop, after emergency stop will not cause the billet deformation of the pendulum phenomenon. The overall acceleration response time is less than 1 second, the deceleration response time is less than 2 seconds, the speed error is less than ±1%, the upper horizontal runout is less than 0.1mm, the lateral runout is less than 0.08mm, the vibration value is less than 0.12m/s, and the torque value is greater than 30Nm.

3. Craftsmanship: Collaborating with internationally renowned brand design company - Langjian Company, adopting a streamlined anti-static triangular balanced support design, the appearance is simple, elegant, and elegant; The unique principle of triangular balance support, combined with the use of national standard Q235 steel welding and integrated forming process, makes the entire machine more stable, firm, and durable; The panel is made of ABS material and processed through integrated injection molding with a 350T injection molding machine. The surface pattern is fine, matte, and non reflective, making it easy to waterproof and clean; Three levels of 420mm, 470mm, and 520mm can be adjusted for different heights to meet the requirements of diversified work creation (default factory height is 470mm).

4. Water basin: Adopting a non card magnetic suction structure design, made of PP material, neodymium iron boron magnets are pre embedded through the embedded holes of the water basin. Through high-pressure injection molding, the water basin is easily sucked in without any angle, and after being sucked in, it can rotate 360 degrees at any angle. The non card magnetic suction structure avoids the mud blocking water basin used in traditional drawing machines while meeting the requirements of easy suction and easy cleaning, The problem of using excessive force during disassembly and assembly to lower mud and water onto the body.

5. Foot pedal: Using the Hall effect principle, the Hall element and permanent magnet element are precisely matched at a specific angle to accurately control the potential difference. During acceleration and deceleration, the motor rotation speed and smoothness can be precisely controlled, effectively avoiding control failure caused by signal attenuation in traditional potentiometers; The outer cover is made of aluminum alloy material with a national standard content of 95%, which is die cast and formed. It has the characteristics of corrosion resistance, oxidation resistance, and firmness. The surface sandblasting treatment process of the aluminum alloy is conducive to the adhesion of the surface protective coating. The anti oxidation electrostatic spray coating makes the surface texture of the product comfortable, durable, and non fading. After professional testing, the continuous service life exceeds 300000 times, and the waterproof grade is IPX8, fully improving the service life and safety of the foot pedal.

6. Aluminum plate: Made of hard aluminum alloy material with a national standard content of 95%, it is die cast and formed. The surface is scratch resistant and does not change color. The unique insertion type horizontal lock device makes installation convenient and firm, with a surface runout value less than or equal to 0.1mm, making various works more stable.

7. Safety: The electrical control part adopts national standard anti leakage plugs (plug insulation resistance three-level plug - body (shell) ≥ 7.1 * 105M Ω, grounded - L ≥ 1.07 * 104M Ω, grounded - N ≥ 1.05 * 104M Ω), the whole machine has passed the 1200V high-voltage test, UL certified waterproof switch and connecting wire, UL94HB flame retardant material plastic panel and motor cover, IP65 waterproof sealing ring design, and the whole machine adopts a flowing arc structure design, fully improving the anti-collision safety factor, Ensure the stability and safety of the bottom of the billet drawing machine without swinging.

8. The product has passed the high voltage resistance test of no less than 1200V, UL certified waterproof switch and connecting wire, UL94HB flame-retardant plastic panel and motor cover, and IP65 waterproof sealing ring design;

9. The product is suitable for residential areas, commercial areas, public entertainment areas, outdoor places and other scenes, anti-shock level is not less than 1.

10. The LVD low-voltage directive of the product has been tested in accordance with EN 62233:2008 "Measurement methods for human exposure to electromagnetic fields in household and similar electrical appliances" and EN60335-1-2012 "Safety standards for household and similar electrical appliances".



11. The EMC electromagnetic compatibility of the product has passed DIN EN IEC 61000-6:3:2021 "Emission Standard for Equipment in Residential Environments", DIN EN IEC 61000-6:1:2019 "Immunity of Residential Commercial and Light Industrial Environments", EN 61000-3-3:2013+A1+A2 "Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test", EN IEC 61000-3-2: 2019+A1 "Emission Standard for Equipment in Residential Environments" EN IEC 55014-2:2021 "Electromagnetic Compatibility Immunity Requirements for Household Appliances, Electric Tools and Similar Appliances" and EN IEC 55014-1:2021 "Electromagnetic Compatibility Disturbance Requirements for Household Appliances, Electric Tools and Similar Appliances" are tested.
Back to top

Contact information

Jingdezhen Baitaohui Ceramic Equipment Co., Ltd

Business Consulting: +86 15779816565  13907982575

After sales consultation: +86 19179830909 18607983455

E-mailxieweifeng@jdzbth.com

Address: Building B9, Accelerated Base, Changnan New Area, Jingdezhen City, Jiangxi Province

WeChat scan( WeChat)

Copyright © Jingdezhen Baitaohui Ceramic Equipment Co., Ltd ICP:赣ICP备2022010548号 

Technical Support: jaingxihuabang