3+ Jingdezhen Baitaohui Ceramic Equipment Co., Ltd BTH Taogu 05 Electric Kiln-Jingdezhen Baitaohui Ceramic Equipment Co., Ltd
| Welcome to visit BaiTaoHui!
BTH Taogu 05 Electric Kiln
  • BTH Taogu 05 Electric Kiln

BTH Taogu 05 Electric Kiln

Model: BTH-SYL-D05D

Net clearance volume: 0.05m ³

Opening method: Top opening door

Dimensions: L837 (including temperature controller) * W820 * H860mm

Furnace size: Ø 420H345mm

Shed board: 1 piece/layer with a diameter of 350 (mm) (delivered to one layer)

Power supply: 220V ± 10V (50HZ)

Power: 6KW

Current: 28A

User idle: 2P/40A

User wire diameter: 2 * 10+1 * 6 square national standard copper core wire

Thermocouple: S-type, single point temperature control

Furnace wire: Domestic alloy furnace wire, circular arrangement

Intelligent instrument: 4.3-inch, 6 sets of programs, 12 segment curve settings

Temperature difference inside the furnace: ± 5 ℃

Rated temperature: 1240 ℃

Curb weight: ≈ 90KG

Frame material: Q235-A+aluminum alloy

Surface treatment: electrostatic spraying, gray

Usage: Oxidation firing of conventional ceramic works


Parameter introduction

Model: BTH-SYL-D05D

Net clearance volume: 0.05m ³

Opening method: Top opening door

Dimensions: L837 (including temperature controller) * W820 * H860mm

Furnace size: Ø 420H345mm

Shed board: 1 piece/layer with a diameter of 350 (mm) (delivered to one layer)

Power supply: 220V ± 10V (50HZ)

Power: 6KW

Current: 28A

User idle: 2P/40A

User wire diameter: 2 * 10+1 * 6 square national standard copper core wire

Thermocouple: S-type, single point temperature control

Furnace wire: Domestic alloy furnace wire, circular arrangement

Intelligent instrument: 4.3-inch, 6 sets of programs, 12 segment curve settings

Temperature difference inside the furnace: ± 5 ℃

Rated temperature: 1240 ℃

Curb weight: ≈ 90KG

Frame material: Q235-A+aluminum alloy

Surface treatment: electrostatic spraying, gray

Usage: Oxidation firing of conventional ceramic works


Product description

Product Function Introduction

Ⅰ、 Product appearance

Color:

The product color is a combination of chrome and gray, presenting the initial appearance of the product through its own color.

Appearance:

The product adopts the design language of round sky and round earth, with circle as the main body, which reflects the portability and lightness of the product from the perspective of visual sense while using stability.



Ⅱ、 Product structure:

1. The top cover opening method uses semi-automatic hydraulic rod flip support, solving the problem of manual support for traditional top cover opening.

2. The multi-layer insulation structure is composed of aluminum alloy, Mitsubishi blanket, and refractory high-temperature bricks, ensuring stable temperature difference inside the kiln.

3. Full brick structure, effectively reducing the volatilization of carcinogens.

4. The circular furnace wire structure and thermal energy distribution algorithm ensure that the temperature difference of the kiln is controlled within ± 7 ℃.

5. Fluid dynamics design, based on Bernoulli fluid mechanics principles to design exhaust ducts and improve kiln efficiency.



Ⅲ、 Main materials of the product

1. The body is made of aluminum alloy material with strong high-temperature resistance, oxidation resistance, and corrosion resistance; A high percentage of chromium and nickel gives it much better creep strength, allowing for continuous operation at high temperatures and excellent high-temperature resistance;

The Q235-A steel for the kiln support frame has good plasticity, processability, weldability, and corrosion resistance. Its mechanical properties are relatively stable, with high strength and toughness. In low-temperature environments, Q235A steel also has good toughness.

2. The furnace wire is made of advanced domestic iron chromium aluminum alloy material, with a long service life. The furnace wire can withstand high temperatures up to 1300 degrees Celsius when heated.

3. JM26 lightweight refractory brick, low hot melt, low thermal conductivity coefficient of 0.2-0.4w/m.k, less accumulated heat energy, fast furnace heating, effectively reducing energy consumption.



Ⅳ、 Product performance/functionality

1. All brick "no" cotton design, the surface usage rate of Mitsubishi blankets in the entire kiln is about 0.05%, which is not easy to volatilize carcinogenic substances and reduces energy consumption by 30%.

2. The surface alloy will not change color or turn yellow for ten years.

3. The product weighs approximately 90kg (the lightest in China with the same volume) and saves on handling costs.

4. The sound during firing is light (like the sound of a household refrigerator starting).

5. Open the lid lightly and use a bidirectional hydraulic rod: the opening force is light (like picking up a bottle of 500ML mineral water).

6. Portable and quick disassembly, users can perform simple maintenance.

7. Low energy consumption and fast firing time (can be completed in 17 hours).

8. The temperature difference inside the kiln is ± 7 ℃, and the product firing effect is good.

9. 5G Internet independently developed temperature control system, with a Chinese and English operating interface, foolproof operation (including functions such as over temperature alarm, fault inquiry, automatic saving of burning data, remote real-time control, and anti false start stop).

10. 360 ° rotating universal wheel, can move at any angle.

11. One click easy locking of the door (as if pressing the lid switch of a water cup).

12. The controller screen is designed according to ergonomics, making it convenient and quick to disassemble, meeting the comfort of different people holding the controller.

13. Door opening and power-off function (if the door is accidentally opened during the kiln firing process, it will immediately shut off to prevent danger).

Back to top

Contact information

Jingdezhen Baitaohui Ceramic Equipment Co., Ltd

Business Consulting: +86 15779816565  13907982575

After sales consultation: +86 19179830909 18607983455

E-mailxieweifeng@jdzbth.com

Address: Building B9, Accelerated Base, Changnan New Area, Jingdezhen City, Jiangxi Province

WeChat scan( WeChat)

Copyright © Jingdezhen Baitaohui Ceramic Equipment Co., Ltd ICP:赣ICP备2022010548号 

Technical Support: jaingxihuabang